Windows yang cocok untuk Cyberindo Diskless

Cyberindo Disk 1.2.1116 : Windows Xp, Windows 7, Windows 10 1607

Cyberindo Disk 1.3.28 - 1.3.29 : Windows 10 1607 dan Windows 10 1703

Remove Windows 10 BloatWare

There are 2 methods :
1. Manually
- Run powershell as administrator.
- Type these commands to get list of windows bloatware :

DISM /Online /Get-ProvisionedAppxPackages | select-string Packagename

Create boot image for PCs with UEFI using Ccboot

Follow these steps:
1. Make sure you choose UEFI boot from your Windows 10 Installation device, eg: usb drive.
2. Install as usual.
3. Set static ip according to your network configuration, like this picture below :

BlueKeep Patch for Windows 7

BlueKeep Patch for Windows 7 :
- From microsoft : https://www.catalog.update.microsoft.com/Search.aspx?q=KB4499175
- Alternate Link : BlueKeep Patches

Failed to install Intel Management Engine (IME) driver in Windows 7

Solution for error when installing Intel Management Engine (IME) driver in windows 7 :

1. Download windows update from this link KB2685811, choose your system 64 bit or 32 bit.
2. Install the patch, reboot if required. Then try to install IME driver again.

Alternate Link to the patches : KB2685811

Ghost Error 25002

Solution for Error 25002 when cloning drives using Norton Ghost :

1. Boot from the drive source normally.
2. Open Command Prompt, then type chkdsk /f /r then enter. Choose yes to check disk after restart.
3. Restart your Pc. Wait until check disk complete, then do the cloning again using ghost.

Setting Virtual Disk diserver diskless (Cyberindo / CCboot ) menggunakan iSCSI

Untuk setting virtual disk tanpa menggunakan feature hybrid / virtual disk Cyberindo / CCdisk dengan hanya menggunakan iSCSI bawaan windows , berikut langkah - langkahnya :
- Install server diskless baik menggunakan cyberindo / CCboot Server seperti biasa.
- Install di Pc client, Cyberindo client pilih menu Diskless Mode dan Cyberindodisk jika menggunakan software dari cyberindo, jika menggunakan CCboot install CCboot client.
- Setelah selesai, buka control panel dan masuk ke dalam Administrative Tools.
- Klik iSCSI Initiator, klik tab Discovery, klik tombol Discover Portal, isikan ip server dikotak ip address dan klik ok.
- Setelah itu klik tab Targets dan klik list target yang statusnya inactive dikotak Discovered Targets kemudian klik tombol Connect, lalu  klik ok. Jika tidak ada error status target akan berubah  menjadi connected.
- Cek di windows explorer apakah drive virtual sudah muncul atau belum.