Repair iusb3hxc.sys Blue Screen of Death ( BSOD ) in Diskless Environment

Have you experienced this blue screen before in diskless environment ? . This BSOD usually occurred because there is conflicted driver for Intel Usb 3 for each mainboard in your diskless environment.

Fix "PNP Detected Fatal Error" Blue Screen in CCBoot Client Image

Mount the Client's Parent Image with CCBoot server console or with Windows Disk Management and delete  CCBootPNPX.sys in "C:\Windows\System32\Drivers" folder. Don't forget to save the image after you did it.

CCBoot No more network devices

CCBoot No more network devices error usually happens in old motherboard. To fix this, you just need to change PXE option to gpxe.pxe in CCBoot server.

Second method :

- Stop Ccboot server then format write-back disk.

Windows 10 Network Optimization for CCBoot Diskless

This Optimization can be done before image is created ( Windows 10 still on harddrive as operating system ) and after image is created ( modify Windows 10 image using "Enable super client" feature in CCBoot server). Before we continue, make sure you have installed CCBoot client. Then use PnP tool to collect local NIC and merge the collected NIC. After that, follow these steps :

1. First, check PCI value of the ethernet using device manager. Open device manager, then go to "Network adapter". Right click on the ethernet then choose properties, then click on Details tab. Change Property to Device instance path, then in Value box you will see the PCI value of the ethernet. Take note of the value, in the picture below the important thing of the value is PCI\VEN_10EC&DEV_8168 and REV_15.

Create boot image for PCs with UEFI using Ccboot

Follow these steps:
1. Make sure you choose UEFI boot from your Windows 10 Installation device, eg: usb drive.
2. Install as usual.
3. Set static ip according to your network configuration, like this picture below :

CCboot network topology ( layout )

Note :
2 cables in LACP mode allows each switch users to be able to share 4.0 Gbps of bandwidth between 2 switches. DO NOT use more than 1  cables without LACP between the switches.
You can use 1 cable between the switches if you do not have manageable switch however, max usable bandwidth for clients will be 3.0 Gbps only.

Source : https://www.ccboot.com/ccboot-layout.htm

CCboot Stuck Booting di Windows 10

Jika CCboot stuck di windows 10 dengan chipset terbaru seperti h110, h310 atau chipset terbaru lainnya. Coba lakukan beberapa solusi berikut di bawah ini.

Solution :
- Install driver lan asli dari motherboard dan jangan gunakan driver lan bawaan dari Microsoft.

-  Jangan klik yes ketika ditanya "optimize windows" ketika selesai install ccboot client.

- Jangan pilih semua  NIC driver di jendela "NIC Drivers" ketika sudah selesai install ccboot client. Uncheck semua pilihan NIC dengan mengklik "select all" dan klik ok.

- Lalu klik "NIC PnP", kemudian klik "Collect Local Nic", lalu klik "Merge Collected NIC".

- Jika masih stuck, enable "Network Stack" di bios.

- Jika masih stuck juga ganti PXE nya di client properties di Ccboot server, dari "gpxe.pxe" ke "gpxex.pxe".

- Jika masih stuck juga , tambahkan NIC driver ke image dengan menggunakan feature Add NIC Driver to Image di CCBoot server. Dengan cara sebagai berikut :